Question 1.
Which of the following types of port is not found on a Cisco 2501 router:

a) BNC Coaxial
b) AUI
c) Serial
d) RJ-45

Answer

Question 2.
Which memory types can a router boot from?

a) ROM
b) RAM
c) NVRAM
d) Flash

Answer

Question 3.
Where can the running configuration of a router be found?

a) In ROM
b) In RAM
c) In NVRAM
d) In Flash

Answer

Answers

Question 1.
Which of the following types of port is not found on a Cisco 2501 router:

a) BNC Coaxial
b) AUI
c) Serial
d) RJ-45

Answer
a) BNC Coaxial

Explanation
The Cisco 2501 comes standard with AUI, serial, and RJ-45 ports. If you need to connect to a coaxial Ethernet, use an Ethernet transceiver with a 10Base2 or 10Base5 physical medium dependent connector.
[3519]

Question 2.
Which memory types can a router boot from?

a) ROM
b) RAM
c) NVRAM
d) Flash

Answer
a) ROM
d) Flash

Explanation
In router config mode you can use the boot sys command to instruct a router to boot from ROM or Flash, not NVRAM or RAM. You can also boot from a TFTP server, an option not listed here.
[3520]

Question 3.
Where can the running configuration of a router be found?

a) In ROM
b) In RAM
c) In NVRAM
d) In Flash

Answer
b) In RAM

Explanation
The running configuration is in RAM. The startup configuration is in NVRAM. The "Power On Self Test" and "Bootstrap Startup Program" can be found in ROM. The IOS software image exists in Flash. Depending on the hardware platform, the image either may run directly from flash or be copied into RAM for execution.
[3521]